LCD Laminating & Bubble Removing Machine-MT17

LCD Laminating & Bubble Removing Machine-MT17

1. Plug in and turn on the power switch.

LCD Laminating & Bubble Removing Machine-MT17
LCD Laminating & Bubble Removing Machine-MT17

2. Press set button to set the laminating temperature at 40℃-45℃, vacuum time at 30s, laminating time at 30s, bubbler temperature at 40℃-45℃, bubbler time at 10-15mins.

3. Align the LCD and glass with the mould and put it into the machine for laminating(for the glass with bezel, a laminating mould will be needed).

LCD Laminating & Bubble Removing Machine-MT17
LCD Laminating & Bubble Removing Machine-MT17

4. Close the door and press the start button.

5. After the setting time, open the door and take out the LCD assembly. 6. Turn left to open the door of bubbler cabin and put into the LCD assembly.
LCD Laminating & Bubble Removing Machine-MT17
LCD Laminating & Bubble Removing Machine-MT17
7. Turn right to close the door and press the start button for bubble removing. 8. After the setting time, make sure the value of laminator piezometer is zero, open the door and take out the LCD assembly.
LCD Laminating & Bubble Removing Machine-MT17
LCD Laminating & Bubble Removing Machine-MT17